Publications

  1. Luo, Q., Liu, D.X., Qiao, P., Feng, Q.G., and Sun, L.Z., 2017, “Microstructural damage characterization of concrete under freeze-thaw action”, International Journal of Damage Mechanics, vol, xx, In Press.
  1. Wang, Y. and Sun, L.Z., 2017, “Development of dielectric elastomer nanocomposites as stretchable actuating materials”, Applied Physics Letters, DOI: 10.1063/1.4997092, 111, 161904-1-4.
  1. Hu, Z.J., Fang, J.Q., and Sun, L.Z., 2017, “Blast effect zones and damage mechanisms of concrete bridges under above-deck car-bomb attacks”, International Journal of Damage Mechanics, vol, 26, In Press.
  1. Li, Y.X. and Sun, L.Z., 2017, “Active vibration control of elastically connected double-beam systems”, ASCE Journal of Engineering Mechanics, DOI: 10.1061/(ASCE)EM.1943-7889.0001341, vol. 143(9), 04017112-1-12.
  1. Ma, H.Y., Zhou, C., Feng, D., and Sun, L.Z., 2017, “Influence of fine aggregate content on low temperature cracking of asphalt pavements”, ASTM Journal of Testing and Evaluation, DOI: 10.1520/JTE20150240, vol. 45, 835-842.
  1. Hu, Z.J., Zhang, Y.F., Zeng, Z., and Sun, L.Z., 2017, “Blast responses of bridge girders with consideration of isolation effect induced by car bomb”, ASME Journal of Engineering Materials and Technology, DOI: 10.1115/1.4035273, vol. 139, 021003-1-7.
  1. Damiani, R. and Sun, L.Z., 2017, “Microstructural characterization and effective viscoelastic behavior of magnetorheological elastomers with varying acetone contents”, International Journal of Damage Mechanics, DOI: 10.1177/1056789516657676, vol. 26, 104–118.
  1. Wang, Y. and Sun, L.Z., 2017, “Synthesis and characterization of dielectric elastomer nanocomposites filled with multiwalled carbon nanotubes”, ASME Journal of Engineering Materials and Technology, DOI: 10.1115/1.4035490, vol. 139, 021018-1-8.
  1. Gu, H., Wu, Z.R., Huang, X.F., Song, J.T., and Sun, L.Z., 2016, “Dam-zoning modulus reconstruction using adjoint method”, European Journal of Environmental and Civil Engineering, DOI: 10.1080/19648189.2016.1230521, 1-22.
  1. Hu, Z.J., Wu, L., Zhang, Y.F., and Sun, L.Z., 2016, “Dynamic responses of concrete piers under close-in blast loading”, International Journal of Damage Mechanics, DOI: 10.1177/1056789516653245, vol, 25, 1235-1254.
  1. Li, Y.X., Hu, Z.J., and Sun, L.Z., 2016, “Dynamical behavior of a double-beam system interconnected by a viscoelastic layer”, International Journal of Mechanical Sciences, vol. 105, 291-303.
  1. Li, Y.X. and Sun, L.Z., 2016, “Transverse vibration of an undamped elastically connected double-beam system with arbitrary boundary conditions”, ASCE Journal of Engineering Mechanics, vol. 142, 04015070-1-18.
  1. Le, A.Q., Sun, L.Z., and Miller, T.C., 2016, “Health monitoring and diagnosis of solid rocket motors with bore cracks”, ASCE Journal of Aerospace Engineering, vol. 29, 04015058-1-10, DOI: 10.1061/(ASCE)AS.1943-5525.0000556.
  1. Hu, Z.J., Wu, D.J., and Sun, L.Z., 2015, “Integrated investigation of an incremental launching method for the construction of long-span bridges”, Journal of Constructional Steel Research, vol. 112, 130-137.
  1. Wang, Y., Kim, S., Li, G.P., and Sun, L.Z., 2015, “Filler orientation effect on relative permittivity of dielectric elastomer nanocomposites filled with carbon nanotubes”, Computational Materials Science, vol. 104, 69-75.
  1. Kuo, C.C., Li, Y.X., Nguyen, D., Buchsbaum, S., Innes, L., Esser-Kahn, A.P., Valdevit, L., Sun, L.Z., Siwy, Z., and Dennin, M., 2015, “Macroscopic strain controlled ion current in an elastomeric microchannel”, Journal of Applied Physics, vol. 117, 174904-1-6.
  1. Li, R. and Sun, L.Z., 2014, “Dynamic viscoelastic modeling of magnetorheological elastomers”, Acta Mechanica, vol. 225, 1347-1359.
  1. Liu, B., Yu, H.Y., Verbridge, S.S., Sun, L.Z., and Wang, G., 2014, “Dictionary-learning-based reconstruction method for electron tomography”, Scanning, vol. 36, 377-383.
  1. Liu, Y., Wang, G., and Sun, L.Z., 2014, “Elastography method to identify material distribution in two-phase nonlinear media”, ASCE Journal of Engineering Mechanics, vol. 140, 04014010-1-10.
  1. Li, R. and Sun, L.Z., 2014, “Dynamic viscoelastic behavior of multi-walled-carbon-nanotube-reinforced magnetorheological nanocomposites”, ASCE Journal of Nanomechanics and Micromechanics, vol. 4, A4013014-1-7.
  1. Wang, H., Zhang, Y.N., Wu, R.Q, Sun, L.Z., Xu, D.S., and Zhang, Z.D., 2013, “Understanding strong magnetostriction in Fe100-xGax alloys”, Scientific Reports, vol. 3, Article Number: 3521, doi: 10.1038/srep03521.
  1. Wang, H., Zhang, Z.D., Wu, R.Q, and Sun, L.Z., 2013, “Large-scale first principles determination of anisotropic mechanical properties of magnetostrictive Fe-Ga alloys”, Acta Materialia, vol. 61, 2919-2925.
  1. Li, R. and Sun, L.Z., 2013, “Viscoelastic responses of silicone-rubber-based magnetorheological elastomers under compressive and shear loadings”, ASME Journal of Engineering Materials and Technology, vol. 135, 021008-1-7.
  1. Le, A.Q., Sun, L.Z., and Miller, T.C., 2013, “Detectability of delaminations in solid rocket motors with embedded stress sensors”, AIAA Journal of Propulsion and Power, vol. 29, 299-304.
  1. Li, R. and Sun, L.Z., 2013, “A micromechanics-based viscoelastic model for nanocomposites with imperfect interface”, International Journal of Damage Mechanics, vol. 22, 967-981.
  1. Chen, Y.Q., Huang, R.C., Huang, Z.P., and Sun, L.Z., 2012, “Effective specific heats of multi-phase thermoelastic composites”, Acta Mechanica Solida Sinica, vol. 25, 262-276.
  1. Wang, Z.G., Liu, Y., Wang, G., and Sun, L.Z., 2011, “Nonlinear elasto-mammography for characterization of breast tissue properties”, International Journal of Biomedical Imaging, vol. 2011, 540820-1-10.
  1. Tan, E.H. and Sun, L.Z., 2011, “Dislocation-induced stress field in multi-layered heterogeneous thin film system”, ASCE Journal of Nanomechanics and Micromechanics, vol. 1, 91-103.
  1. Li, R. and Sun, L.Z., 2011, “Dynamic mechanical behavior of magnetorheological nanocomposites filled with carbon nanotubes”, Applied Physics Letters, vol. 99, 131912-1-3.
  1. Li, R. and Sun, L.Z., 2011, “Dynamic mechanical analysis of silicone rubber reinforced with multi-walled carbon nanotubes”, Interaction and Multiscale Mechanics, vol. 4, 239-245.
  1. Wang, H., Zhang, Y.N., Yang, T., Zhang, Z.D., Sun, L.Z., and Wu, R.Q., 2010, “Ab initio studies of the effect of nanoclusters on magnetostriction of Fe1-xGax alloys”, Applied Physics Letters, vol. 97, 262505-1-3.
  1. Liu, D.X., Zhang, Z.D., and Sun, L.Z., 2010, “Nonlinear elastic load-displacement relation for spherical indentation on rubberlike materials”, Journal of Materials Research, vol. 25, 2197-2202.
  1. Shih, T.C., Chen, J.H., Liu, D.X., Nie, K., Sun, L.Z., Lin, M., Chang, D., Nalcioglu, O., and Su, M.Y., 2010, “Computational simulation of breast compression based on segmented breast and fibroglandular tissues on magnetic resonance images”, Physics in Medicine and Biology, vol. 55, 4153-4168.
  1. Wang, Z.G., Liu, Y., Wang, G., and Sun, L.Z., 2009, “Elastography method for reconstruction of nonlinear breast tissue properties”, International Journal of Biomedical Imaging, vol. 2009, 406854-1-9.
  1. Wang, Z.G., Sun, L.Z., Fajardo, L.L., and Wang, G., 2009, “Modeling and reconstruction of diffuse optical tomography using adjoint method”, Communications in Numerical Methods in Engineering, vol. 25, 657-665.
  1. Zhou, G.Y. and Sun, L.Z., 2008, “Smart colloidal dampers with on-demand controllable damping capability”, Smart Materials and Structures, vol. 17, 055023-1-11.
  1. Skolnik, D.A., Liu, H.T., Wu, H.C., and Sun, L.Z., 2008, “Anisotropic elastoplastic and damage behavior of SiCp/Al composite sheets”, International Journal of Damage Mechanics, vol. 17, 247-272.
  1. Yin, H.M., Paulino, G.H., Buttlar, W.G., and Sun, L.Z., 2008, “Effective thermal conductivity of functionally graded particulate nanocomposites with interfacial thermal resistance”, Journal of Applied Mechanics, Transactions of ASME, vol. 75, 051113-1-6.
  1. Liu, H.T. and Sun, L.Z., 2008, “A micromechanics-based elastoplastic model for amorphous composites with nanoparticle interactions”, Journal of Applied Mechanics, Transactions of ASME, vol. 75, 031009-1-10.
  1. Yin, H.M., Paulino, G.H., Buttlar, W.G., and Sun, L.Z., 2008, “Heat flux field for one spherical inhomogeneity embedded in a functional graded material matrix”, International Journal of Heat and Mass Transfer, 51, 3018-3024.
  1. Yin, H.M., Paulino, G.H., Buttlar, W.G., and Sun, L.Z., 2007, “Micromechanics-based thermalelastic model for functionally graded particulate materials with particle interactions”, Journal of the Mechanics and Physics of Solids, vol. 55, 132-160.
  1. Liu, Y., Wang, G., and Sun, L.Z., 2006, “Anisotropic elastography for local passive properties and active contractility of myocardium from dynamic heart imaging sequence”, International Journal of Biomedical Imaging, 2006, 45957-1-15.
  1. Yin, H.M. and Sun, L.Z., 2006, “Magneto-elastic modeling of composites containing randomly dispersed ferromagnetic particles”, Philosophical Magazine, vol. 86, 4367-4395.
  1. Tan, E.H. and Sun, L.Z., 2006, “Stress field due to a dislocation loop in a heterogeneous thin film-substrate system”, Modelling and Simulation in Materials Science and Engineering, vol. 14, 993-1013.
  1. Yin, H.M. and Sun, L.Z., 2006, “Effective magnetic permeability of composites containing chain-structured particles”, Acta Materialia, vol. 54, 2317-2323.
  1. Paulino, G.H., Yin, H.M., and Sun, L.Z., 2006, “Micromechanics-based interfacial debonding model for damage of functionally graded materials with particle interactions”, International Journal of Damage Mechanics, vol. 15, 267-288.
  1. Wang, Z.G., Liu, Y., Sun, L.Z., Wang, G., and Fajardo, L.L., 2006, “Elasto-mammography, theory, algorithm, and phantom study”, International Journal of Biomedical Imaging, 2006, 53050-1-11.
  1. Yin, H.M., Sun, L.Z., and Chen, J.S., 2006, “Magnet-elastic modeling of composites containing chain-structured magnetostrictive particles”, Journal of the Mechanics and Physics of Solids, 54, 975-1003.
  1. Liu, H.T., Sun, L.Z., and Ju, J.W., 2006, “Elastoplastic modeling of progressive interfacial debonding for particle-reinforced metal-matrix composites”, Acta Mechanica, vol. 181, 1-17.
  1. Yin, H.M. and Sun, L.Z., 2005, “Elastic modeling of periodic composites with particle interactions”, Philosophical Magazine Letters, vol. 85, 163-173.
  1. Yin, H.M. and Sun, L.Z., 2005, “Magnetoelasticity of chain-structured ferromagnetic composites”, Applied Physics Letters, 86, 261901-1-3.
  1. Yin, H.M. and Sun, L.Z., 2005, “Magnetic properties of randomly dispersed magnetic particulate composites: a theoretical study”, Physical Review B, vol. 72, 054409-1-6.
  1. Yin, H.M., Sun, L.Z. and Paulino, G.H., 2005, “A multiscale framework for elastic deformation of functionally graded composites”, Materials Science Forum, vol. 492/493, 391-396.
  1. Liu, H.T. and Sun, L.Z., 2005, “Multiscale modeling of elastoplastic deformation and strengthening mechanisms in aluminum-based amorphous nanocomposites”, Acta Materialia, vol. 53, 2693-2701.
  1. Liu, H.T., Sun, L.Z. and Wu, H.C., 2005, “Monte-Carlo simulation of particle-cracking damage evolution in metal matrix composites”, Journal of Engineering Materials and Technology, Transactions of ASME, vol. 127, 318-324.
  1. Yin, H.M., Paulino, G.H., Buttlar, W.G., and Sun, L.Z., 2005, “Effective thermal conductivity of functionally graded particulate composites”, Journal of Applied Physics, vol. 98, 063704-1-9.
  1. Liu, Y., Sun, L.Z., and Wang, G., 2005, “Tomography-based 3-D anisotropic elastography using boundary measurements”, IEEE Transactions on Medical Imaging, vol. 24, 1323-1333.
  1. Liu, H.T. and Sun, L.Z., 2004, “Effects of thermal residual stresses on effective elastoplastic behavior of metal matrix composites”, International Journal of Solids and Structures, vol. 41, 2189-2203.
  1. Liu, H.T., Sun, L.Z. and Ju, J.W., 2004, “An interfacial debonding model for particle-reinforced composites”, International Journal of Damage Mechanics, vol. 13, 163-185.
  1. Yin, H.M., Sun, L.Z., Wang, G., Yamada, T., Wang, J. and Vannier, M.W., 2004, “ImagerParser: a tool for finite element generation from three-dimensional medical images”, BioMedical Engineering OnLine, vol. 3, 31(1-9).
  1. Yin, H.M., Sun, L.Z. and Paulino, G.H., 2004, “Micromechanics-based elastic model for functionally graded materials with particle interactions”, Acta Materialia, vol. 52, 3535-3543.
  1. Yin, H.M., Sun, L.Z., Wang, G. and Vannier, M.W., 2004, “Modeling of elastic evolution of cirrhotic human liver”, IEEE Transactions on Biomedical Engineering, vol. 51, 1854-1856.
  1. Sun, L.Z. and Ju, J.W., 2004, “Elastoplastic modeling of metal matrix composites containing randomly located and oriented spheroidal particles”, Journal of Applied Mechanics, Transactions of ASME, vol. 71, 774-785.
  1. Sun, L.Z., Ju, J.W. and Liu, H.T., 2003, “Elastoplastic modeling of metal matrix composites with evolutionary particle debonding”, Mechanics of Materials, vol. 35, 559-569.
  1. Wang, D., Chen, J.S. and Sun, L.Z., 2003, “Homogenization of magnetostrictive particle-filled elastomers using an interface-enriched reproducing kernel particle method”, Finite Elements in Analysis and Design, vol. 39, 765-782.
  1. Sun, L.Z., Liu, H.T. and Ju, J.W., 2003, “Effect of particle cracking on elastoplastic behavior of metal matrix composites”, International Journal for Numerical Methods in Engineering, vol. 56, 2183-2198.
  1. Liu, H.T., Sun, L.Z., Wang, G. and Vannier, M.W., 2003, “Analytic modeling of breast elastography”, Medical Physics, vol. 30, 2340-2349.
  1. Yin, H.M., Sun, L.Z. and Chen, J.S., 2002, “Micromechanics-based hyperelastic constitutive modeling of magnetostrictive particle-filled elastomers”, Mechanics of Materials, vol. 34, 505-516.
  1. Ju, J.W. and Sun, L.Z., 2001, “Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities, Part I: micromechanics-based formulation”, International Journal of Solids and Structures, vol. 38, 183-201.
  1. Sun, L.Z. and Ju, J.W., 2001, “Effective elastoplastic behavior of metal matrix composites containing randomly located aligned spheroidal inhomogeneities, Part II: applications”, International Journal of Solids and Structures, vol. 38, 203-225.
  1. Ghoniem, M., Tong, S.H., Singh, B.N. and Sun, L.Z., 2001, “On dislocation interaction with radiation-induced defect clusters and plastic flow localization in fcc metals”, Philosophical Magazine A, vol. 81, 2743-2764.
  1. Sun, L.Z., Ghoniem, M. and Wang, Z.Q., 2001, “Analytical and numerical determination of the elastic interaction energy between glissile dislocations and stacking fault tetrahedra in fcc metals”, Materials Science and Engineering A, vol. 309, 178-183.
  1. Ghoniem, M., Singh, B.N., Sun, L.Z. and de la Rubia, T.D., 2000, “Interaction and accumulation of glissile defect clusters near dislocations”, Journal of Nuclear Materials, vol. 276, 166-177.
  1. Sun, L.Z., Ghoniem, M., Tong, S.H. and Singh, B.N., 2000, “3-D dislocation dynamics study of plastic instability in irradiated copper”, Journal of Nuclear Materials, vol. 283/287, 741-745.
  1. Ghoniem, M., Tong, S.H. and Sun, L.Z., 2000, “Parametric dislocation dynamics: a thermo-dynamics-based approach to investigations of mesoscopic plastic deformation”, Physical Review B, vol. 61, 913-927.
  1. Ju, J.W. and Sun, L.Z., 1999, “A novel formulation for the exterior-point Eshelby’s tensor of an ellipsoidal inclusion”, Journal of Applied Mechanics, Transactions of ASME, vol. 66, 570-574.
  1. Ghoniem, M. and Sun, L.Z., 1999, “Fast-sum method for the elastic field of three-dimensional dislocation ensembles”, Physical Review B, vol. 60, 128-140.
  1. Li, H., Li, J.B., Sun, L.Z. and Wang, Z.G., 1997, “Modification of the residual stress state in a SiCp/6061 Al composite by low temperature treatment”, Composites Science and Technology, vol. 57, 165-172.
  1. Li, S.X., Sun, L.Z., Li, H., Li, J.B. and Wang, Z.G., 1997, “Stress carrying capability and interface fracture toughness in SiC/6061 Al model materials”, Journal of Materials Science Letters, vol. 16, 863-869.
  1. Li, H., Li, J.B., Sun, L.Z., Li, X.S. and Wang, Z.G., 1996, “Effect of low temperature treatment regime on residual stress state near interface in bonded SiC/6061 Al compounds”, Materials Science and Engineering, vol. A221, 179-186.
  1. Li, H., Sun, L.Z., Li, J.B. and Wang, Z.G., 1996, “X-ray stress measurement and FEM analysis of residual stress distribution near interface in bonded ceramic/metal compounds”, Scripta Materialia, vol. 34, 1503-1508.
  1. Sun, L.Z., Li, S.X., Zang, Q.S. and Wang, Z.G., 1995, “Dependence of fatigue crack closure behavior on volume fraction of martensite in dual-phase steels”, Scripta Metallurgica et Materialia, vol. 32, 517-521.
  1. Wang, Z.G., Li, S.X. and Sun, L.Z., 1995, “Fatigue and fracture of discontinuously reinforced aluminum matrix composites” (Invited Paper), Key Engineering Materials, vol. 104/107, 729-748.
  1. Han, N.L., Wang, Z.G. and Sun, L.Z., 1995, “Low-cycle fatigue behavior of a SiCp reinforced aluminum-matrix composite at ambient and elevated-temperature”, Scripta Metallurgica et Materialia, vol. 32, 1739-1745.
  1. Han, N.L., Wang, Z.G. and Sun, L.Z., 1995, “Effect of reinforcement size on low-cycle fatigue behavior of SiC particle-reinforced aluminum-matrix composites”, Scripta Metallurgica et Materialia, vol. 33, 781-787.
  1. Li, S.X., Sun, L.Z., Jia, W.P. and Wang, Z.G., 1995, “Paris law in metals and ceramics”, Journal of Materials Science Letters, vol. 14, 1493-1495.
  1. Li, S.X., Yao, G., Tang, Y.D., Sun, L.Z. and Wang, Z.G., 1994, “Heating of metal-ceramic foils in an electron-microscope”, Scripta Metallurgica et Materialia, vol. 30, 1547-1552.
  1. Li, S.X., Chen, M., Zhang, T.Y., Sun, L.Z. and Wang, Z.G., 1994, “The crack-growth toward the grain-boundary of a fatigued aluminum bicrystal”, Scripta Metallurgica et Materialia, vol. 31, 897-902.
  1. Li, S.X., Sun, L.Z., Wang, Z.G. and Tang, Y.D., 1994, “Stress distribution in SiCp/Al composite with interphase”, Journal of Materials Science Letters, vol. 13, 1022-1026.
  1. Li, S.X., Sun, L.Z. and Wang, Z.G., 1993, “A model of Hall-Petch relationship in nanocrystalline materials”, Nanostructured Materials, vol. 2, 653-661.
  1. Li, S.X., Sun, L.Z., Fu, S.Y. and Wang, Z.G., 1993, “An estimation of fracture of SiC particulate affected by aluminum alloy matrix”, Scripta Metallurgica et Materialia, vol. 28, 869-874.
  1. Sun, L.Z. and Huang, Z.P., 1992, “Dynamic void growth in rate-sensitive plastic solids”, International Journal of Plasticity, vol. 8, 903-924.
  1. Li, S.X., Sun, L.Z. and Wang, Z.G., 1992, “The relationship between crack closure ratio and Kmax at near-threshold levels”, Scripta Metallurgica et Materialia, vol. 27, 1669-1672.
  1. Huang, Z.P. and Sun, L.Z., 1992, “The optimal mode and an approximate expression of final displacement in dynamic plastic response of structures”, Journal of Applied Mechanics, Transactions of ASME, vol. 59, 33-38.
  1. Li, S.X., Sun, L.Z., Zang, Q.S. and Wang, Z.G., 1992, “A geometric model for fatigue crack closure induced by fracture surface roughness under mode I displacements”, Materials Science and Engineering, vol. A150, 209-212.
  1. Li, S.X., Wang, K.Y., Sun, L.Z. and Wang, Z.G., 1992, “A simple-model for the refinement of nanocrystalline grain-size during ball milling”, Scripta Metallurgica et Materialia, vol. 27, 437-442.
  1. Li, S.X., Sun, L.Z., Sun, Z.M. and Wang, Z.G., 1991, “Thermal residual stress relaxation at surface of SiC/Al composite”, Scripta Metallurgica et Materialia, vol. 25, 2431-2434.